Companion Doll Repair Guide: Tips & Fixes

Contents

• Damage Found During Unboxing
• TPE vs Silicone Doll Repair: What Changes by Material?
• Safety Notes Before You Begin
• How to Fix These at Home
• After the Repair: What to Check
• Repair Supplies Selected by Wifeydoll
• Frequently Asked Questions

A Wifeydoll companion is chosen to bring a quiet, reassuring presence into your private world—and thoughtful care ensures she remains a lasting part of it. Over time, gentle marks of shared moments may appear, from subtle pressure indentations and minor surface tears to dye transfer or loosened nails. This guide walks you through material-safe ways to restore her original beauty and softness.

Because TPE and platinum silicone possess distinct physical natures, sex doll repair calls for specialized, non-interchangeable solutions for each material. Should a mark run deep, begin to spread, or rest near delicate joints, structural seams, or private channel openings, sharing a few clear photographs with Wifeydoll Support is the most reassuring first step before applying adhesives.

Everyday wear does not always mean permanent damage. Many common issues—such as pressure marks, light surface tears, color transfer, or detached nails—can often be improved with the right repair products and material-specific methods. Understanding what caused the damage is usually the first step toward choosing an appropriate repair approach.

• Minor surface issue: check the material first, then choose the matching repair product.
• Unboxing damage: document the box, packaging, label, and damaged area before any repair attempt.
• Structural or functional issue: contact Wifeydoll Support instead of treating it as surface damage.

Damage Found During Unboxing

If damage shows up during unboxing, photograph the shipping box, shipping label, inner packaging, and the affected area, then contact Wifeydoll within48 hours of delivery. Keep the packaging and leave the affected area as found until the initial review is complete, before applying any cleaning or repair products. See theAfter-Sales Service Policyfor full reporting details.

TPE vs Silicone Doll Repair: What Changes by Material?

The same damage can need different care depending on the material. A TPE dent may respond to a warm, damp cloth and light massage. A silicone dent is handled with gentle surface smoothing instead.

The table below matches common issues to the right approach for each material; full instructions appear in the next section. The silicone filling methods apply to compatible constructions, not every silicone doll.

Safety Notes Before You Begin

A few precautions make repair work safer for you, not just her. Work in a well-ventilated space, away from open flames or heat sources, and keep all repair products out of reach of children. Avoid contact with eyes and skin — if a product does touch them, rinse thoroughly with water and seek medical advice if irritation continues. The syringe needle used for gel and glue injection is sharp, so handle it slowly and deliberately, and dispose of used needles, glue, and packaging responsibly rather than with regular household trash. If you have sensitive skin or a respiratory condition, take extra care, and check with a doctor beforehand if you’re unsure. None of these products should be mixed with anything other than their intended pair.

How to Fix These at Home

This section covers the most common sex doll repair needs at home — pressure marks, surface tears, stains, loose or detached nails, silicone air pockets, gel-filled areas that have lost fullness, and minor silicone leakage.

Pressure Dents

A pressure dent often comes from protective foam, tight clothing, or long pressure in one spot.

1. Remove the source of pressure and let the area rest without weight on it — many packaging marks ease on their own once this happens.
2. For silicone, gently stretch and smooth the skin around the dent. For TPE, apply a warm (not hot) damp cloth and massage the area lightly.
3. Skip direct heat as a routine fix — high temperatures can cause new surface damage rather than solving the original one.

A deep dent, one near a seam or joint, or a mark that doesn’t ease after time without pressure is a different story than a routine packaging mark.

Small Surface Tears

A small tear that’s shallow, stable, and on a flat area that doesn’t bend often is usually a fair candidate for material-specific repair glue. Keep the tear from being pulled wider while handling the doll, and make sure the product matches her material.

For silicone:

1. Mix both parts of the repair glue in equal amounts just before use, combining thoroughly until the mixture thickens slightly.
2. Apply a thin layer to the clean, dry tear with a swab or applicator tool, then wipe away any excess from the surrounding surface.
3. Hold a hair dryer on a low, gentle setting at a distance to help the glue set faster — too much heat too close can introduce bubbles and weaken the bond.
4. Let the repair sit undisturbed for at least half an hour before checking it.

For TPE:

1. Clean the area and apply the glue directly.
2. Wipe away any residue.
3. Let the repair sit undisturbed for at least half an hour before checking it.

Mix only as much silicone glue as you’ll use right away, since the formula begins curing quickly once combined.

Stains and Color Transfer

Color transfer tends to come from dark clothing, printed fabric, makeup, or contact with untested materials.

1. Start with a gentle pass using cleansing oil made for the doll’s material — a TPE-only oil isn’t a general cleaner for silicone. This often lifts surface residue on its own.
2. If color remains, apply a material-compatible stain remover to the affected area and let it sit for around 8 hours — this lifts most of the discoloration in a single treatment.
3. Finish by cleaning the area again with cleansing oil.

Deeper stains may need more than one round of this to fully lighten, and a trace of color difference can remain even after care. Harsh solvents or unverified removers can damage the surface, so stick with a product made for the doll’s material.

This is different from color fading, where the skin itself gradually loses depth of color over time rather than picking up an outside stain. Stain remover is made to lift transferred pigment, not to restore her original tone — if you’re noticing gradual fading rather than a stain, contact Wifeydoll Support, who can offer a color-matched touch-up.

A Loose or Detached Nail

A loose or detached artificial nail is usually a small detail fix when the fingertip itself is intact.

1. Clean and dry the nail area first.
2. Apply a thin, careful layer of compatible nail glue.
3. Press the nail back into place and hold it gently for about 30 seconds.

Avoid squeezing the nail and fingertip together too firmly while it sets, since extra pressure can strain the bond rather than strengthen it.

Nail glue is meant for the nail detail alone, not for skin tears, structural seams, private channel openings, or structural repair.

Skin Bulges or Air Pockets

A raised or uneven area on a silicone companion doll is usually caused by air trapped beneath the surface.

1. Release the trapped air with a syringe.
2. Inject a small amount of silicone repair material into the cavity.
3. Apply gentle, even pressure to help the material distribute and the surface settle.

Earlier treatment gives the area a better chance of returning to a smoother shape; severe deformation may not recover completely.

Breast or Buttock Sagging

When a gel-filled breast or buttock looks sunken or less full than before, the affected area can be replenished with AB gel.

1. Mix Gel A and Gel B in equal parts just before use — the combined gel begins to firm up quickly, so work while it’s still workable.
2. Draw the mixed gel into the syringe and connect it securely to the needle.
3. Inject the mixture gradually into the area, adjusting the needle’s position as you go so the gel settles evenly rather than pooling in one spot.
4. Withdraw the needle and rinse the syringe with cleansing oil afterward to keep it from clogging for next time.

A severe or sudden change, or a repair that does not hold, should be reviewed by Wifeydoll Support before more material is added.

Minor Silicone Leakage

A small amount of silicone oil on the surface, often near the head, can indicate minor leakage.

1. Wipe away the excess oil.
2. Keep the area clean and dry.
3. Seal the opening with silicone-compatible repair glue.

If the leakage returns, spreads, or cannot be traced to a small surface opening, pause the repair and contact Wifeydoll Support.

After the Repair: What to Check

Once a minor repair is done, check for stability first. The repaired edge should stay closed after the product cures as directed. The surface should stay free of odd stickiness, looseness, swelling, or extra discoloration.

Before dressing, posing, cleaning, or storing her as usual, ease off friction and pressure around the repaired area for a while. If the edge reopens or the surface changes in a way that feels off, pause and send Wifeydoll Support a clear photo.

A visible line, slight color difference, or change in texture can still remain even when the repair itself is holding well.

Repair Supplies Selected by Wifeydoll

The products below cover the most common sex doll repair and touch-up needs for both silicone and TPE materials.

Frequently Asked Questions